Kawai ATX2/ATX2-f - Manual (Page 92)

92
Set
tings
MIDI Settings
 MIDI Functions
The AnyTimeX2 piano supports the following MIDI functions:
Transmit/receive note information
Transmit/receive note information to/from a MIDI-connected
musical instrument or device.
Transmit/receive program change information
Transmit/receive program change data to/from a MIDI-
connected musical instrument or device.
Transmit/receive channel settings
Specify transmit/receive channels within the range of 1 to 16.
Transmit/receive pedal data
Transmit/receive sustain, sostenuto, and soft pedal data to/
from a MIDI-connected musical instrument or device.
Transmit/receive exclusive data
Transmit/receive front panel or menu function settings as
exclusive data.
Receive volume data
Receive MIDI volume data sent from a MIDI-connected
musical instrument or device.
Multi-timbral mode setting
Receive multiple channel MIDI data from a MIDI-connected
musical instrument or device.
* Please refer to the ‘MIDI Implementation Chart’ on page 118 for
further information regarding the MIDI capabilities of the AnyTimeX2
piano.
 MIDI Settings
No. Setting Description Default setting
1 MIDI Channel Specify the channel that is used to transmit/receive MIDI information. 1
2 Send PGM Change # Send a MIDI program change number from 1 to 128. 1
3 Local Control Specify whether internal sounds will be heard when the keyboard is pressed. On
4 Trans. PGM Change Specify whether program change data is sent when sounds are changed. On
5 Multi-timbral Mode Specify whether the instrument can receive Multi-timbral MIDI information. Off
6 Channel Mute Specify which channels (1-16) are activated to receive MIDI information. Play All
* Default settings will be shown in the fi rst LCD display illustration (i.e. Step 1) for each setting explanation below.
 Entering the MIDI Settings menu
While the normal playing mode screen is shown in the LCD display:
Press the FUNCTION button (MENU).
The Function Menus screen will be shown in the LCD display.
Press the  or  buttons to select the MIDI Settings menu.
Press the FUNCTION button (ENTER) to enter the MIDI Settings
menu.
 Selecting and adjusting the desired setting
After entering the MIDI Settings menu:
Press the  or  buttons to move the selection cursor over the
desired setting.
Press the  or  buttons to adjust the selected setting.
* To reset the current setting to the default value, press the FUNCTION
button (RESET).