Kawai ATX2/ATX2-f - Manual (Page 88)

88
Set
tings
Virtual Technician Settings
15
. User Key Volume
The User Key Volume settings allows the volume of each of the 88-keys to be adjusted individually.
* This Virtual Technician setting will aff ect all sounds.
1. Selecting the User Key Volume setting
After entering the Virtual Technician menu (page 70):
Press the  or  buttons to select the User Key Volume setting.
2. Selecting the User Key Volume memory
Press the  or  buttons to select one of the User Key Volume
memories.
* Up to four diff erent User Key Volume memories can be created and
stored.
Press the FUNCTION button (EDIT).
The User Key Volume adjustment screen will be shown in the
LCD display.
2. Selecting the note, adjusting the User Key Volume
Press the  or  buttons to select the desired note to be
adjusted.
* To select a note directly, press and hold the FUNCTION button
(+ KEY) then press the desired key.
Press the  or  buttons to adjust the User Key Volume for the
selected note.
* The User Key Volume value can be adjusted within the range of
–50 - +50.
* To reset the User Key Volume setting to the default value, press the
FUNCTION button (RESET).
* Any changes made to the User Key Volume setting will remain until
the power is turned off .
3. Exiting the User Key Volume function
Press the FUNCTION button (BACK) to exit the User Key Volume
adjustment screen and return to the User Key Volume setting.