Kawai ATX2/ATX2-f - Manual (Page 65)

65
Set
tings
10
. Damper Hold
The Damper Hold setting is used to determine whether sounds such as organ or strings should be sustained
continuously when the sustain (damper) pedal is pressed, or whether these sounds should decay, naturally.
 Damper Hold setting
Damper Hold Description
Off (default) Organ, strings, etc. sounds will gradually decay, even while the sustain pedal is pressed.
On Organ, strings, etc. sounds will be sustained continuously while the sustain pedal is pressed.
1. Selecting the Damper Hold setting
After entering the Basic Settings menu (page 54):
Press the  or  buttons to select the Damper Hold setting.
2. Changing the Damper Hold setting
Press the  or  buttons to turn the Damper Hold setting on
or off .
* To reset the Damper Hold setting to the default setting, press the
FUNCTION button (RESET).
* Any changes made to the Damper Hold setting will remain until the
power is turned off .
3. Exiting the Damper Hold setting
Press the FUNCTION button (BACK) to exit the Damper Hold
setting and return to the Function Menus screen.