Kleenmaid GCT6010 User Manual
Page 12
12
Should there be no cable and/or plug on the
equipment, use suitable absorption material
for the working temperature as well, as indicated
on the matrix plate. Under no circumstance must
the cable reach a temperature above 50°C of the
ambient temperature. If connecting directly to the
mains power supply, fit a multi-pole switch of a
suitable size for the rated capacity with a clearance
distance which completely disconnects the power
line under overvoltage category III conditions,
consistently with the rules of installation (the yellow/
green earth wire must not be interrupted). The plug
or omni polar switch must be easily reached on the
installed equipment.
To avoid all risk, if the power cable becomes
damaged, it must only be replaced by the
manufacturer, by an authorised service centre,
or by a qualified electrician.