Laminator Direct EZ-LAM Budget PRO - Manual (Page 2)

2
CAUTION
...
READ BEFORE OPERATING
DO NOT RUN THE MACHINE IN REVERSE
WHEN THERE IS FILM ON THE FRONT
ROLLERS, ESPECIALLY HOT FILM. THIS WILL
CAUSE THE FILM TO DISPLACE THE
TEMPERATURE SENSOR AWAY FROM THE
ROLLER. THE HEAT CONTROLLER WILL
RECEIVE AN INCORRECT LOWER READING
OF THE TEMPERATURE AND THE ROLLERS
WILL BE OVERHEATED AND POSSIBLY
DAMAGED.
BEFORE REVERSING THE MACHINE TO
REMOVE A WRAP-AROUND, CUT THE FILM
FROM THE SUPPLY ROLL AND PULL THE FILM
AWAY FROM THE FRONT ROLLERS.
TO AVOID ANY DAMAGE, PLEASE DO NOT
USE RAZORS OR SHARP OBJECTS NEAR
THE ROLLERS.
DO NOT LEAVE MACHINE ON WHEN NOT IN
USE OR YOU WILL DAMAGE YOUR ROLLERS!