Laminator Direct EZ-LAM Budget PRO - Manual (Page 6)

6
INTRODUCTION
Congratulations on your purchase of the LSI Easy-Lam Budget PRO (EZPRO27) Roll Laminator.
This unit is designed to provide years of trouble-free service.
The EZPRO27 will accept rolls of laminating film up to 27” wide in thicknesses up to 10 mil. The
speed of lamination is determined by the thickness of the film. Thicker films must be run at
slower speeds for best results.
Your EZPRO27 is preset at the factory for most applications so any adjustments should be minor.
A digital heat controller provides continual indication of the heated roller temperature and may be
adjusted as needed.
Laminator Standard Features...
Preset laminating roller pressure
Variable speed control
Feed table with adjustable guide.
Digital heat controller for monitoring temperature.
Silicon laminating rollers for exceptional clarity.
Laminating film widths up to 27”.
Total thickness up to 70 mils (laminate plus paper).
SPECIFICATIONS
Plastic Width
27” (68.6cm)
Plastic Thickness
1.5 mil and 3 mil
Maximum Roll Length 1.5 mil - 1,000 feet (304.8 meters)
3 mil - 500 feet (152.4 meters)
Dimensions
15” (38.0 cm) L x 35” (88.9) W x 13.5” (34.3 cm) H
Net weight
66lbs. (28 kg)
Power Requirements
120VAC, 60Hz, 1440 watt