Laminator Direct EZ-LAM Budget PRO - Manual (Page 5)

5
Do not overload electrical outlets beyond their capacity as this can result in fire or
electrical shock. This unit is rated at 15 amps and should be the only item
plugged into a 15 or 12 amp branch circuit. When connected to a 20 amp branch
circuit any items in addition to the EZPRO27 must not exceed 4 amps.
Adjust only those controls that are specified in these Operating Instructions.
Do not attempt to service or repair the laminator yourself. Unplug the laminator
from the electrical outlet and contact an authorized service representative under
any of the following conditions:
• When the power supply cord or plug is damaged or frayed.
• If liquid has been spilled into the laminator or it has been exposed to water.
• If the laminator has been subjected to excessive jarring through being
dropped or bumped.
• If the laminator does not operate normally when following the operating
instructions.