Lencore Spectra i.Net: Reports User Manual User Manual
Page 27
v1.0
Lencore Acoustics Corp. One Crossways Park Drive West Woodbury, NY 11797 p 516-682-9292 f 516-682-4785 [email protected]
Spectra i.Net®, Spectra® Classic™, n.FORM™, Spectra® Tangent™ are trademarks of Lencore Acoustics Corp. All rights reserved. © Copyright 2013
26
SPECTRA i.NET REPORTS MANUAL
EQ SETTINGS
Masking 30 band EQ:
The EQ located within the Spectra i.Net Reports program is very useful tool when tuning masking to a space. It
is a 30 band Parametric EQ with an adjustable Q (width of the frequency band). To access the EQ settings got to
the “View OP’s” tab, then select the OP and channel which you would like to make the adjustment to. Once the
OP and channel is selected you can then scroll down on the right hand side of the screen until you reach the grid
labeled “Mask 1/3 Octave EQ”. In the grid you will see numbers 1- 30 at the top of the “Mask 1/3 octave EQ”,
beneath that is the frequency being adjusted for each band.
Under the column named “EQ dB (+/- 5 dB)” is where the dB level will be entered for each band. The reports pro-
gram runs off of a +/- 5 scale capable of entering in .5 intervals, meaning you can enter -5 to +5 in this section.