MacroSystem Deluxe-Titler 3D - Manual (Page 6)

that is separate from the text input function that
comes with SMART EDIT.
You can of course also connect an external
keyboard to enter your text such as the
separately available Power Key option that is
compatible with SMART EDIT.
3. Installation / Starting the
program
In order to install the Deluxe Titler 3D software,
you will need at least version 2.5 of the SMART
EDIT system software. Leave your system
switched on and, in the System settings menu,
press the Install product button to open the
corresponding window. If you are installing
from a SmartMedia card, insert it into the
drive. When you insert the card, make sure the
gold-colored contacts are facing downwards
and the beveled corner is at the front left, i.e.
pointing towards the device. If the Deluxe Titler
3D software is supplied on a CD/DVD and your
system is equipped with a DVD drive and the
DVD-Arabesk software, you should open the
drive tray and insert the CD/DVD into the DVD
burner. If you are installing from a CD/DVD,
you might hear clearly audible sounds coming
from the drive – this indicates that the system is
reading the CD/DVD. In a moment you will see
the Deluxe Titler 3D software listed in the Install
product window. Select it from the list and click
on Activate.
After a short time a numerical keypad appears.
You can use it to enter the license code that you
purchased from your dealer. A message will
then inform you that the installation process
has completed. You can now take out the
SmartMedia card or CD/DVD.
If you wan to install Deluxe Titler 3D as a demo
version, select it from the list and click on
Activate.
If you are using version 2.5 or higher of the
SMART EDIT software, click on Cancel in the
numerical code window that subsequently
appears.
If you are using version 3.1 or higher of the
SMART EDIT software, click on the Demo button
in the numerical code window.
You will notice that the word Demo has
appeared after the program name. Confirm with
Ok and then take out the SmartMedia card or
CD/DVD.
Deluxe Titler 3D is now installed as a demo
version.
This demo version allows you to use all the
functions, however, the word “Demo” will be
displayed over the effect after the calculations
have been completed.
You will now see the Deluxe Titler 3D program
sorted alphabetically in the list of title effects in
the Titling menu.
Insert the desired video scene (or a blank scene)
into the storyboard, select Deluxe Titler 3D
and click on Insert so that the effect is placed
over the scene. Afterwards, make the changes
that you want to the Titler settings in the effect
options that are described in the next chapter.
Changes can only be made properly to all the
settings if the title effect has been inserted into
the storyboard.
4. Operation
This chapter will explain how to operate Deluxe
Titler 3D using the various buttons and controls.
If you have selected Deluxe Titler 3D from the
title effects you will see several effect options on
the right-hand side.
4.1 Enter text
Since Deluxe Titler 3D does not use the usual
function provided by the SMART EDIT titler for
entering text, you will see the program‘s own