MacroSystem Pro-Pack - Manual (Page 9)

8 9
After you have inserted an Image Processing
effect and perhaps specified its range, you can
click on Full Size to bring up an additional menu.
In the background you see the middle frame
of the entire segment for the inserted Image
Processing effect (if the effect is applied on the
entire scene, then you will see the middle frame
of the video scene).
An operating panel with effect options (to the
right, if there are any for the selected effect),
overlays the video.
To the left you see the button Display with four
available possibilities. With Original you can
view your original scene. With Effect you can
observe your scene with the applied effect. Orig.
+ Effect displays the original scene in the left
screen half and the applied effect in the right
half. In this way you can easily compare the
original with the applied effect.
The option Compare divides the screen into
two parts. To the right you see your new scene
(with effect) and to the left a scene that you
can freely choose from the scene bin using the
button Choose scene positioned below. This
lets you, for example, exactly adjust the color to
correspond to another scene.
Above the function Display you see the Frame
slider with which you can set the point in time of
the long-term effect that you want to view.
In this way you can view the inserted effect at
any point in time of the scene. The button does
not have to be confirmed, so that you can scroll
slowly through the scene and view the effect at
the same time.
Of course, you can change the effect options as
you wish and thus have the possibility of directly
comparing various colors and directions.
The effect options set in this menu are accepted
with OK and you are returned to the Edit menu.
With Cancel you exit the Full Size menu without
changes.
The arrow button serves to move the Single-
image menu to the upper screen edge, whilst
the button above allows you to minimize the
user panel.
Note: Real-time effects can not be monitored in
single-frame preview.
You’ll also notice the presence of a Scene button
in this screen.
If you would like to overlay several long-term
effects, you at first insert an effect into a scene
and create it. Then you convert the scene with
the inserted effect into a separate scene. To do
this click on the button Scene. A window ap-
pears in which you can select the range for the
new scene.
The name of the effect applied appears under
Name as default name for the new scene. You
can change this name by clicking on it and cal-
ling up the keyboard.
You also have the three options Effect, Effect +