MBM Corporation iCREASE AIR - Manual (Page 15)

PROGRAMMING FOR CREASE MODE
Half Fold: Press the Crease Mode Button > Half > Start Measuring > Physically Run a
sheet through the machine for the sensor to measure > Accept > Run > Feed.
EXAMPLE:
Tri-Fold: Press the Crease Mode Button > Tri-Fold > Start Measuring > Physically Run
a sheet through the machine for the sensor to measure > Accept > Run > Feed.
EXAMPLE:
Z-Fold: Press the Crease Mode Button > Z-Fold > Start Measuring > Physically Run a
sheet through the machine for the sensor to measure > Accept > Run > Feed.
EXAMPLE:
Letter Fold: Press the Crease Mode Button > Letter > Start Measuring > Physically Run
a sheet through the machine for the sensor to measure > Accept > Run > Feed.
EXAMPLE:
Roll Fold: Press the Crease Mode Button > More > Roll > Start Measuring > Physically
Run a sheet through the machine for the sensor to measure > Accept > Run > Feed.
EXAMPLE:
12