MicroLinks UM06 - user guide - Manual (Page 15)

13
1.3.4 LED/ Light socket
(1) LED○ h : Provides luminance for object lens 4x; total 30 LEDs (6 LEDS have
wider angles as shown in the figure).
(2) Light socket○ i : Provides luminance for object lens 10x. (Optional accessory)
1.4 Microscope Focus
There are two ways to focus. First, choose focus distance to adjust the
microscope height, then tuning focus by remote controller until clear. On the
contrary, first to choose the image sensor position then adjusts the microscope
height.
 Focus distance: distance from object lens to object.
 Image sensor position: The image sensor position.
1.4.1 Focus Techniques
(1) Fixed focus distance
Use knob ○
j
or ○
k
to adjust the distance from the object lens to the object.
When the distance is closer, the magnification size is higher. When the focus
distance is fixed, use the remote controller or far distance control mode on
○
i
○ h