MicroLinks UM06 - user guide - Manual (Page 18)

16
(2) Object lens 10X, focus distance from 0.5mm to 1.0mm (0.196 to 0.393 inch.)
1.5 Microscope accessory
1.5.1 Calibrator
Mainly used to calibrate the scale on the application program (please refer to the AP
manual for more information). The calibrator is transparent and can be applied onto
the object directly.
1.5.2 White balance card
The white side is used to calibrate the white balance. If the object is tiny, place it
onto the white balance card and move the card instead of the object.
Object lens 10X on 21.5” screen (this data is only for reference)
Sensor position 1 2 3 4 5 6 7 8
Distance (mm) 9.85 9.35 9.00 8.65 8.35 8.10 7.88 7.66
F,S FOV (mm) 1.41 1.31 1.22 1.14 1.07 1.01 0.96 0.91
C FOV (mm) 1.04 0.97 0.90 0.84 0.79 0.75 0.71 0.67
F Magnification (X) 253 273 293 313 334 354 372 393
S Magnification (X) 337 363 390 417 445 471 495 523
C Magnification (X) 455 491 527 563 601 637 669 707
Sensor position 9 10 11 12 13 14 15
Distance (mm) 7.46 7.28 7.10 6.96 6.84 6.74 6.64
F,S FOV (mm) 0.87 0.83 0.79 0.76 0.73 0.70 0.67
C FOV (mm) 0.64 0.61 0.58 0.56 0.54 0.52 0.50
F Magnification (X) 411 431 452 470 490 511 534
S Magnification (X) 547 574 602 626 653 681 711
C Magnification (X) 739 775 813 846 882 919 961