MicroLinks UM02 - user manual - Manual (Page 47)

Microscope Application Program http://www.ViTiny.com
47
Copyright © 2008-2012 MicroLinks Technology Corp.
Contacted Non-Contacted
Fig.5-34 Contacted and Non-Contacted
According to the above steps it can measure horizontal and vertical scale. Several examples as
follows:
EX1: Measurement for non-contact object.
Use the “metal ruler” as a measurement base, the machine and the observation
object of distance is 2.2 cm, the focus of the video image is clear. Image
shown in Fig.5-35 and Fig.5-36 is the result after measurement, horizontal and
vertical scale range is 24.2mm and 18.1mm.
Fig.5-35 Horizontal scale range is 24.2mm Fig.5-36 Vertical scale range is 18.1mm
EX2: Measurement for contacted object in low mag.
Use the “metal ruler” for measurement of the base, the machine and the
observation object of distance is close, the focus of the video image is clear.
Image shown in Fig.5-37 and Fig.5-38 is the result after measurement,
horizontal and vertical scale range is 5.60mm and 4.20mm.
Fig.5-37 Horizontal scale range is 5.60mm Fig.5-38 Vertical scale range is 4.20mm