Montigo M38DV PFC - Manual (Page 10)

P/N XG0202 Page 10
M38DV-PFC Peninsula Gas Fireplace
Installation
Removing and Installing the In-
ner Doors
Door Removal
The inner (combustion) doors are located behind the outer decorative
doors. To remove the inner doors, simply unscrew the nine (9) ma-
chine screws on the top, bottom and side of the door.
(See figure 17).
Door Installation
To attach the inner doors, align the door with the screw holes and
re-fasten with all nine machine screws. Ensure that a good seal is
maintained.
Operation
Lighting Instructions
See Pages 11-12.
Figure 17. Removing inner doors.
9 x machine screws
Burner Adjustment
The M38DV-PFC is equipped with an adjustable burner, allowing you
to raise or lower the flames. To adjust the flames, locate the black
knob marked 'Hi-Lo', in the centre of the gas control valve (See Figure
26). The front burners are not adjustable.
 To raise the flame height, turn the black knob (located behind the
lower trim) counterclockwise.
 To lower the flame height, turn clockwise.
Figure 9. 'Hi-Lo' Adjustment on the M38DV-PFC gas valve.
Note: M38DV-PFC models (electronic ignition) do not feature
hi/lo adjustment.