Dolby Laboratories DVD/VCR Combo - Manual (Page 48)

- 48 - (continued on next page) (continued on next page) (continued on next page) (continued on next page) (continued on next page)
VCR Playback
Inserting a Video Cassette
Gently insert the video cassette into the cassette compartment. The VCR turns on automatically and VCR ON
indicator light up. If the cassette is inserted incorrectly, the loading system will not function. Do not force the cassette
into the VCR.
To remove the cassette, press the TAPE EJECT button during stop mode.
Playback
Preparation
Turn on the TV and select the video channel. (See Setting the 3
↔
4 Output Channel.)
1. When the unit is powered ON and set to VCR mode by pressing the FUNCTION button.
2. Press the VCR ON/OFF
button to turn on the VCR. The VCR ON indicator lights up.
3. Insert a cassette.
4. Press the PLAY
button. (The automatic tracking control system engages and “PLAY” flashes on the TV
screen for a few seconds. See Automatic Tracking control System.) TAPE IN indicator will light up.
5. To stop playback, press the STOP button on the unit or the VCR STOP button on the remote. (If the tape
reaches its end, the VCR will automatically rewinds the tape to the beginning, turn its power off and ejects the
tape.)
Notes:
• If noise should remain on the TV screen after tracking adjustment has been completed by the Automatic Tracking
Control System, use the manual tracking mode.
• Press the CH +/- buttons during playback mode to change to manual tracking mode. Adjust the tracking using the
CH +/- buttons until the noise is minimized or eliminated.
• For tapes recorded in EP on another VCR that still have vertical jitter even after manual adjustment, hold down
the PLAY button for about 2 seconds. (On screen display may be blurred.) Ejecting the tape or turning off the
power will return playback to its normal mode.
Fast Forward and Rewind
1. When the VCR is in stop mode, press the TUNING or TUNING button to fast forward or rewind the cassette.
(The picture cannot be viewed in this mode.)
2. Press the STOP button on the unit or the VCR STOP button on the remote to halt fast forward or rewind.
Notes:
• The
TUNING and TUNING buttons speeds may be slower for cassette tapes other than T-60, T-90 or T-120.
• After rewinding the T-120 cassette tape for about 2 minutes, you can fast forward the cassette tape.
Video Search
Use the following procedure to quickly find the section you want, while viewing the picture.
1. During playback, press the TUNING button for forward video search or the TUNING button for reverse
video search.
There are 2 search speeds in each direction. The VCR switches between them each time the button is pressed.
2. Press the PLAY button to resume normal playback.