Vcr recording, Recording with the timer – Dolby Laboratories DVD/VCR Combo User Manual

Page 55

Advertising
background image

- 55 -

VCR Recording

(continued on next page)

(continued on next page)

(continued on next page)

(continued on next page)

(continued on next page)

Recording with the Timer

Preparation

• Turn on the TV and select the video channel.
• Insert a cassette with the erasure protection tab opening covered. Power will turn on automatically (POWER ON

indicator will light up).

• Press the TV/VCR button to select “VCR” (TAPE IN indicator will light up).
• Check that the clock is displaying the correct time.
• If necessary, set “SAP” on the ENTER button selection screen. (See Mode Selection.)

Procedures

Example:
Recording a TV programme in the SP mode: the TV programme is on channel 7 starting at 9:05 PM and stopping at
10:35 PM on August 10th. The present time is 6:35 PM on February 18th.

1. Press the MEMORY button. The Timer screen will appear and then press

the ENTER button.

2. Select the desired month/day (DATE) with the cursor

or

button and

then the press the button. The cursor will move to the next column.

EX: February 18th

• If you want to record every day or week at the same time, hold the cursor

button when you select the date.

When pressing: The recording date changes in this sequence:

8/10

MO-FR

MO-SA

DAILY

SAT…SUN

8/9

8/8…

(next year)

8/10

8/11

8/12…….8/8

8/9

SUN…..SAT…..

(present)(tomorrow) (next year)

3. Select the desired channel with the cursor

or

button and then

press the

button.

EX: Channel 07

4. Set the recording start time (hour digits and minute digits) with the

cursor

or

button and then press the cursor

button.

EX.: 9:05 PM

Press the AM/PM button to select AM or PM.

5. Set the recording stop time with the cursor

or

button and then

press the

cursor button.

EX.: 10:35 PM

6. Select the tape speed with the cursor

or

button.

EX.: SP

Advertising