Dolby Laboratories DVD/VCR Combo - Manual (Page 54)

- 54 -
Simple Recording Timer
The Simple Recording Timer (SRT) enables you to set the recording stop time. The SRT can be set on the TV screen
by using the remote control.
The SRT cannot be set if the clock has not been set. Make sure the clock is set before setting the SRT.
Preparation
• Turn on the TV and select the video channel. (See Setting the 3
↔
4 Output Channel.)
• Insert a cassette with the erasure protection tab opening covered. Power will turn on automatically (VCR ON
indicator will light up).
• Press the TV/VCR button to select “VCR” (TAPE IN indicator will light up).
• If necessary, set “SAP” on the ENTER button selection. (See Mode Selection.)
VCR Recording
Procedures
Example:
Recording a TV programme in the SP mode. The programme is on Channel 2, ending at 9:50 AM. The present time
is 8:43 AM.
Changing the Contents of the Simple Recording Timer
1. Press the REC button. The stop time flashes on the TV screen.
2. Change the stop time as desired using the REC button.
Cancelling the Simple Recording Timer
1. Press the VCR STOP button.
Notes:
• The Simple Recording Timer has priority over other recordings.
• Ordinary timer programmes will not be recorded when portions of the time setting of the simple recording timer
and of the time setting of the ordinary timer recording overlap.
Example:
Ordinary timer recording ………………………
(9:30 AM to 10:30 AM)
Simple recording timer………………………..
(9:00 AM to 10:00 AM)
02
1. Select the desired channel with the numbered buttons or CH +/-
buttons. EX.: Channel
→
02
2. Set the recording speed (SP or EP) with the SP•EP button on the
remote control. EX.: SP
3. Press the REC button to enter the recording mode (REC indicator
will light up).
Then, press the REC button again to enter the simple recording timer
mode (TIMER indicator will light up). The recording stop time is
displayed.
EX.: 8:50 AM
4. Each press of REC button increases the stop time by 10 minutes.
Note:
• The recording stop time will flash for a few seconds before the stop
time is fixed.
SP
SP STOP 8 : 50 AM
02
SP STOP 9 : 50 AM
02
5. When the stop time comes, recording is finished and the power turns off.
NOT
recorded
Recorded
Recorded
9:00 10:00 11:00 12:00
(continued on next page) (continued on next page) (continued on next page) (continued on next page) (continued on next page)