Dolby Laboratories DVD/VCR Combo - Manual (Page 57)

- 57 -
VCR Recording
(continued on next page) (continued on next page) (continued on next page) (continued on next page) (continued on next page)
Confirming Timer Programmes
You can see on the Timer setting screen a list of all timer programmes that are already set.
1. Press the MEMORY button. TIMER screen will appear.
• Check the information displayed.
2. If you want to correct the data, select the data to be changed with the cursor
or button and then press the ENTER button. Correct the data as desired
using the cursor , , or button.Then Press the ENTER button.
See 2/2 screen also.
3. Pressing the MENU button will clear the screen.
The display shown to the left appears for 5 seconds, after which the normal
screen returns.
• After checking or correcting the programme contents, press the VCR ON/
OFF button to enter, the Timer Standby mode. (At the same time, TIMER
indicator will light up.)
Preparation
• Turn on the TV and select the video channel.
• Press the VCR ON/OFF button (VCR ON indicator will light up) and then press
the TV/VCR button to select “VCR” (TAPE IN indicator will light up).
Cancelling Timer Programmes
Perform the following procedure to cancel timer programmes that have already been set.
1. Press the MEMORY button. TIMER screen will appear.
• Select the programme you wish to cancel with the cursor or button.
2. Double-check that it is the programme you wish to cancel and press the CLEAR
button. It will be cleared on the screen.
3. Pressing the MENU button will clear the screen.
The display shown to the left appears for 5 seconds, after which the normal
screen returns.
• If there are still some programmes set, press the VCR ON/OFF button to
enter the Timer Standby mode. (At the same time, TIMER indicator will light
up.)
• If you press the MENU button when all of the timer programmes are cancelled,
the screen will return to normal.
Preparation
• Turn on the TV and select the video channel.
• Press the VCR ON/OFF button (VCR ON indicator will light up) and then press
the TV/VCR button to select “VCR” (TAPE IN indicator will light up).