ONICON F-5200 Inline - Manual (Page 7)

11451 Belcher Road South, Largo, FL 33773 • USA • Tel +1 (727) 447-6140 • Fax (727) 442-5699 • [email protected]
F-5200 Inline Thermal Mass Flow Meter Manual 05/14 - 0763-4 / 19476
Page 7
1.4 ADDITIONAL HARDWARE THAT MAY BE REQUIRED
1.4.1 Gaskets for Flanged Meters
For F-5200 Inline Thermal Mass Flow Meters provided with ANSI class 150 or class 300
flanges require gaskets for proper installation. ONICON does not supply gaskets.
Gaskets used must comply with all relevant AGA and ANSI standards.
1.5 WORKING ENVIRONMENT
F-5000 series meters are designed for installation and use in typical industrial environments that
are free of corrosive liquids and fumes, direct liquid exposure, heavy condensation, temperature
extremes and vibrations. Do not install the meter in direct sunlight.
The operating ambient air temperature range is -5° to 150° F.
The electrical power should be relatively clean, free of high frequency noise, large voltage
transients, and protected from power surges and brown outs.
1.6 WARRANTY & SERIAL NUMBER
Warranty
ONICON provides a 2-year warranty for this product. Certain exclusions apply. Please refer to
Appendix A-3, ONICON’s Terms and Conditions of Sale for details.
Serial Number
The serial number of your F-5200 series flow meter is located on the nameplate attached to the
side of the enclosure.