Partner B305 CBS Rev.7 - Manual (Page 2)

IDENTIFICATION (WHAT IS WHAT?)
IDENTIFICATION OF SYMBOLS
WARNING:
Hot surface.
-- 2 --
4
17
1. TRIMMER HEAD
2. TRIMMER LINE
3. SHIELD
4. BLADE
5. OUTPUT SHAFT
6. “Bullhorn” HANDLE
7. THROTTLE TRIGGER
8. ON/OFF SWITCH
9. THROTTLE TRIGGER LOCK
OUT
10. CHOKE LEVER
11. STARTER ROPE HOUSING
12. FUEL TANK
13. AIR FILTER COVER
14. STARTER HANDLE
15. MUFFLER SHIELD
16. PRIMER BULB
17. SHOULDER HARNESS
18. COUPLER
19. THROTTLE LOCK
Whenever the machine is in use,
safety glasses must be worn to
safeguard against flying objects.
Ear protection must also be used
in order to protect to operators
hearing. If the operator is
working in an area where there is
a risk of falling objects a safety
helmet must also be worn.
Keep people or animals at least
15m away from the machine
during operation
WARNING:
Cutting elem-
ents continue to rotate after the
engine turned off
Guaranteed sound power level
LWA accordance with directive
2000/14/EC + 2005/88/EC
WARNING:
Rotating blades
Read and understand the Instr-
uction Manual and all warning
labels before using the machine.
Wear gloves to protect
your hands
Wear foot protection
Beware of thrown objects
15m(50ft)
112
Maximum rotational frequency of
the spindle for cutting head
13300
Maximum rotational frequency of
the spindle for blade
11
12
15
7
16
14
13
1
5
8
6
3
2
19
9
18 10