Safety rules, Warning – Partner B305 CBS Rev.7 User Manual

Page 3

Advertising
background image

-- 3 --

SAFETY RULES

WARNING:

When using gas tools,

basic safety precautions, including the

following, should always be followed to

reduce the risk of serious personal injury

and/or damage to the unit. Read all these

instructions before operating this product

and save these instructions.

WARNING:

This machine produces

an electromagnetic field during operation.

This field may under some circumstances

interfere with active or passive medical

implants. To reduce the risk of serious or

fatal injury, we recommend persons with

medical implants to consult their physician

and the medical implant manufacturer

before operating this machine.

WARNING:

Keep children, bystan-

ders, and animals 50 feet (15 meters) away.

If approached stop unit immediately.

WHAT TO DO

READ YOUR USER MANUAL AND ALL

SUPPLEMENTS (IF ANY ENCLOSED)

THOROUGHLY BEFORE OPERATING

YOUR UNIT.

15m(50ft)

Wear close fitting,tough work clothing

that will provide protection, such as long

slacks or trousers, safety work shoes,

heavy duty work gloves, hard hat, a safety

face shield, or safety glasses for eye

protection and a good grade of ear plugs

or other sound barriers for hearing

protection.

Prefuel in a safe place. Open fuel cap

slowly to release any pressure which may

have formed in fuel tank. To prevent a fire

hazard, move at least 10 feet (3 meters)

from fueling area before starting.

Comply

with

all

fire

prevention

regulations. Your unit comes with a spark

arrester screen furnished in the user
kit.Replacement spark arrester screen kits
are available from distributor.

Turn unit off before setting it down.

Always hold unit firmly with both

hands, the thumb and fingers encircling

the handles.

Keep all screws and fasteners tight.

Never operate your equipment when it is

improperly adjusted or not completely and

securely assembled.

Keep handles dry, clean and free of fuel

mixture.

Keep trimmer head as close to ground

as practical. Avoid hitting small objects

with trimmer head. When cutting on a

slope, stand below trimmer head. NEVER

cut or trim on a hill or slope, etc. If there is

the slightest chance of slipping, sliding or

losing firm footing.

Check area you will be trimming for

debris that may be struck or thrown

during operation.

Keep all parts of your body and

clothing away from trimmer head when

starting or running engine. Before starting

engine, make sure trimmer head will not

come in contact with any obstacle.

Stop engine before examining cutting

line.

Store equipment away from possible

ignition sources ,such as gas-powered

water heaters, clothes dryers, or oil-fired

furnaces, portableheaters, etc.

Aways keep the debris shield, trimmer

head, and engine free of debris build-up.

Operation of equipment should always

be restricted to mature and properly

instructed individuals.

WARNING: The emission of exhaust

gases is toxic.

Emergency Stopping Procedure.When it

is necessary to stop engine immediately,

DEPRESS the switch to stop.

This unit has a clutch. The routine for

checking that the clutch is working

correctly is that when the engine returns to

idle the trimmer head stops spinning.

Tighten the cap of oil and fuel tank to

prevent the loss of oil and fuel during

transport.

It is recommended that daily inspection

before use and after dropping or other

impacts to prevent significant damage or

defects.

Prolonged use of this product expose the

operator to vibrations and may produce

‘whitefinger’ disease. In order to reduce

the risk, please wear gloves and keep

your hands warm. If any of the

‘whitefinger’ symptoms appear, seek

medical advice immediately.

BRUSH / GRASS BLADE SAFETY

PRECAUTIONS

FOLLOW

ALL

WARNINGS

and

instructions regarding operation and blade

installation.

BLADE CAN VIOLENTLY THRUST

AWAY FROM MATERIAL IT CANNOT

CUT

- Blade thrust can cause

amputation of arms or legs. Keep

people and animals 50 feet (15 meters)

away in all directions. If blade contacts

foreign objects during operation, turn off

engine and allow coasting blade to stop.

Then check blade for damage. Always

discard blade if it is warped or cracked.

BLADE THROWS OBJECTS VIOLE-

NTLY - You can be blinded or injured.

Wear eye, face, and leg protection.

Always clear work area of any foreign

objects before using blade. Keep people

and animals 50 feet (15 meters) away in

all directions.

Advertising
This manual is related to the following products: