Paso Sound WPSS150M - Manual (Page 11)

-10-
Wired Audio Link
The WPSS150M could be operated as MASTER only. The WPSS150S can only be
operated
as SLAVE.
In order to operate Audio Link, you must have a WPSS150M unit that operates as a
MASTER. Only one unit is allowed to act as MASTER and the other(s) MUST operate as
SLAVE(s). A MASTER unit is capable of connecting up to about 20 SLAVE units.
To operate Audio Link, connect the Active Out of the MASTER to the Audio Link IN of the
1st SLAVE unit. The Out of this SLAVE should be connected to the IN jack of the 2nd
SLAVE unit. Similar connection shall continue as such for the following SLAVE units.
Volume Control for MASTER or for SLAVE.
When used on the MASTER, it controls the MASTER as well as all the SLAVE units.
When used on the SLAVE unit, it only controls that particular SLAVE unit volume.
Maximum number of SLAVE units to be connected with a MASTER is about 20.
Wireless Audio Link
Different from Wired Audio Link, with new SLAVE's capability of installation of receiver
and transmitter modules it eliminates all cable connection and largely extends the number
limit of SLAVEs.
One Master + several SLAVEs (with receiver and transmitter modules built in) : For crowds
of over 3000.
MASTER
SLAVE
SLAVE
SLAVE
SLAVE
SLAVE
SLAVE
Wired Audio Link Connectio n