Paso Sound WPSS150M - Manual (Page 16)

-15-
Operating the DVD player
To begin operation switch on the DVD Power after the main power of WPSS150M has been
turned on.
KEYS FUNCTIONS PANEL REMOTE
PLAY/
PAUSE
When this key is pushed during stop, play will start .
When this key is pushed during CD or DVD is playing, then
it is changed to pause.
When this key is pushed during CD or DVD is pausing,
then it is changed to play .
V V
STOP When this key is pushed during playing , the set is changed
to stop.
The stop point is memorized . Then pressing PLAY/PAUSE
key , the set will play from the stop point.
When this key is pushed twice during playing. the set is
changed to stop, then pressing PLAY/PAUSE key , the set
will play from the beginning.
V V
FUNC When this key is pushed, mode is changed between USB
and disk.
v
UP Press this key to select forward track. v
DOWN Press this key to select backward track. v
CUE In play state ,press “CUE” key to carry out the fast play.
Every press the key ,the play speed will change for one
time X2,X4,X8,X20 and normal in sequence.
v
N/P Press the key to change the TV system in the following
sequence:
PAL→PAL 60→AUTO→NTSC→PAL→...
v v
EJECT Press this key, the disk will move out.
If the disk does not took away, press this key again, the
disk will slot in.
v
REPEAT The defult is REPEAT ALL.
IN MP3 WMA state ,the repeat sequence is as following:
REPEAT 1→REPEAT DIR→REPAT ALL→REPEAT 1→...
In CD playing state , the repeat sequence is as following:
REPEAT 1→REPAT ALL→REPEAT 1→...
v v