Paso Sound WPSS150M - Manual (Page 22)

-21-
- To cancel delete function, just wait for LCD stops flashing and cancellation of delete
function
LCD Display:
LINE: Line in audio source
DEL: When using delete function
▼ : In playing mode
II: Pausing
REP: Repeatedly playing the single track
REP ALL: Repeat all tracks
REP F: Repeat specific folder
RAN: Playback in random order
PROG: When operate to program tracks.
M: Mute function
A→B: When repeat playing a specific section
USB: When use USB function
SD: When use SD card function
COPY: When operate copy function
REC: When operate recording function
: The volume display, total 15 sections.
(1st) : Under the MP3 mode, it will appear the folder numbers.
(2nd) : Display the current playing track.
:Display the time for the current playing track.
THE FUNCTIONS ON THE REMOTE CONTROLLER
The remote controller shall be appointed to the receiving hole of face plate. The optimal
receiving distance is 3 meters. ( the available distance is 3 meters. ) The batteries ( model
CR2025 3V ) shall be put into the remote controller.
■Numeral 0 ~ 9 : Select the track from numerals.
■USB/SD: Switching for USB or SD mode.
■REC: Recording function buttom, use for LINE IN recording.
When both USB and SD Card are both in the device
- Press the REC button. LCD display flashing to indicate will be recorded to USB or SD.
- Use USB/SD button to select the option to record to USB or SD card.
- Press REC to start to recording, LCD starts to flashing indicated that they are recording
- Press STOP button to stop recording.
When only single USB or SD Card in the device
- Press REC to begin recording, LCD starts to flash and indicating that they are recording,
press STOP button to stop recording.
Sound recording through the REC function keys are saved in the directory folder REC
- To Play REC track in folder: press FOLDER button, LCD display F. Use REV or F. WD