Paso Sound WPSS150M - Manual (Page 27)

-26-
UHF beltpack transmitter MW293
Parts and functions
1. Antenna
2. Battery weak / audio mute indicator
3. Audio mute switch
4. Mini-XLR connector
5. Power ON / OFF switch
6. LCD display
7. Charging port
8. Cover release button
9. Charging contacts
10. Lavalier microphone
11. SET
12. UP
13. DOWN
14. Gain control (GT, hign impedance)
15. Gain control (MT, low impedance)
Battery installation
MW293 microphone requires 2 AA-size batteries to operate. Please insert the batteries
according to the correct polarity. Many batteries are known to have leakage problem of
conductive and corrosive liquid. Please observe the rule to remove the batteries if they are
not to be used for a longer period.
Making changes to various settings in MW293
1.Making changes to CHANNEL / FREQUENCY:
Use UP or DOWN button to go to the CHANNEL /FREQUENCY page.
The cursor will flash to allow changes to be made. Pressing UP or DOWN button will
increase or decrease the channel number. The corresponding frequency will change
accordingly. When a desired channel(frequency) is being selected, it will be automatically
saved and stored in the memory.
Remark : When changing transmitter frequencies, user should take care not to cause
interference to other channels / users.
1
2 3 4
5 6 7
8
10
11
12 13
14 15
9