Paso Sound WPSS150M - Manual (Page 17)

-16-
PROG After programming , the player will play the title, chapter or
songs follow the programmed order.
Press PROG button ,the menu will display on the screen
as following:
PROGRAM
T C T C T C
1--:-- 5--:-- 9--:--
2--:-- 6--:-- 10--:--
3--:-- 7--:-- 11--:--
4--:-- 8--:-- 12--:--
5--:-- 9--:-- 13--:--
play clear
In the picture ” T ” means TITLE ,”C” means CHAPTER.
The divided unit of DVD disc is title ,and can divide the title
for several chapters.
Usually one movie has one title.
Some disc are not divided in this way, please pay attention
to it when operate ”GOTO” and “PROG” function.
Input relevant title, chapter that you want with the arrows
and number keys.
Use↑↓←→to move the cursor to “PLAY” in the picture
above, then press “ENTER” button .the player will start
playing follow the programmed order.
Also use the same way to move the cursor to “CLEAR” and
press “ENTER” button ,can clean the programmed order.
Press “PROG” key again will exit the program mode.
v v
MUTE When this key is pushed during disc is playing , the set will
mute the audio output. Push again will recovery the output.
v
POWER Power sw of the set v
GOTO Press GOTO to reach the title , chapter or time you want. v
OSD In play state , Press OSD key ,the play information of the
disc will show on the screen.
Press it again, the OSD information will disappear.
v
PBC The key only act for VCD disc. v
AUDIO In play state, Press “VUDIO” key can choose different
audio channels in the DVD disc.
v
ZOOM In play state, press “ZOOM” key ,The display screen will
zoom by 2X,3X,4X,1/2X,1/3X,1/4X and normal play.
v
SLOW Press “SLOW” key ,the set will become slow motion as
following cycle:
SF ½→SF 1/3→SF 1/4→SF 1/5→SF 1/6→SF
1/7→Normal→SF ½→...
v