Progressive Turf Equipment TDR-30 - Manual (Page 23)

22
13. Move the Outer Wing Deck towards
the main wing deck until they contact
the front and rear plastic bumpers on
the wing deck. Align the outer wing
frame bushings above the main wing
frame bushings.
14. Remove the mat mounting
plate and hardware from the
top of the deck and place the
black grass mat over each
upright bolt. Place the
mounting plate on top of the
grass mat and reinstall the
mounting hardware.
15. Lower the outer wing frame
between each set of mounting
bushings until the lift pins can
slide completely through each
bushing. Secure each pin using
the previous 3/8” bolt, lock
washer and nut.
Plastic
Bumper
Plastic
Bumper
Mounting
Plate
Grass
Mat