Progressive Turf Equipment TDR-30 - Manual (Page 8)

7
TDR-30 MACHINE SPECIFICATIONS
Cutting Width 30 feet
Cutting Height 1/2” to 4” Deck Flexibility 25” up, 15 degree down
Recommended HP 85 Min – 105Max 360 Degree Turn 0” Uncut Circle
Hydraulics Requires 2 double acting
outlets, with float, all hoses
supplied to tractor
Numbers of
wheels
2 on main frame
Transport Width 94” Mowing Capacity MPH 2 4 6 7.5
Acres per hour 7.4 14.6 22 27
Assumes no stops or overlap.
Height 13’ Paint Finish Electrostatically painted with oven
baked finish.
Length 17 ft. SMV Sign Located at back of mower for
safety
Ground Clearance 11” Cutting Weight Total 7400 lbs.
DECK FRAME
Drive PTO shaft to right angle gear box
driving “B” section belts to heavy-
duty spindles.
“A” Frame Hollow structural steel tubing with supports
at high stress areas to achieve maximum
strength.
Belt
Adjustment
Positive screw type belt tensioners. Axles
Wheels
Tires
Rated at 7000 lbs. with re-greasable hubs
8 bolt, 8” bolt circle
33 x 16LL
Deck
Construction
3/16” steel plate formed and
welded with supporting members
at high stress areas to achieve
maximum strength. Deck is 7”
deep.
Hitch 4 positions, with height settings from 10-1/2”
to 15”. Safety chain with hook according to
Dept. of Transport regulations.
Cutting Height Easy and accessible screw
mechanism. Infinite number of
adjustments from 1/2” to 4”
Tongue
Weight
Transport position – 1260 lbs.
Mowing position – 560 lbs.
Spindles 16 spindles, 35mm spindles are
each carried in 2 sealed ball
bearings, which are housed, in a
precision machined hub.
Cylinders Rear deck: (1) 3” x 12” single acting
Wing deck: (2) 4” x 16” single acting
Wing Ext: (2) 2” x 10” double acting
Blade Support 3/4” x 2 1/2” x 8” long bar welded
to spindle and machined. 1/2”
bolts hold blade rigid to provide
clean level cut.
Main Gear
Box
4 shaft gear box with 1-3/8”-6 spline shafts,
delivering power to decks.
Blades
Speeds
High lift, heat treated, alloy steel
blades 5/16” x 2-1/2” x 24”.
Optional low-lift and Pro EZ
change blade system available.
Tractor PTO – 540 RPM
Blades – 2890 RPM
Blade Tip Speed 18,300 FPM PTO Shafts
Screw Jack
Deck Drive telescoping agricultural PTO
Drive shafts, with proper safety shields.
1-3/8”-6 spline quick-disconnect yokes on
both ends.
7000 lbs. side wind jack for easy hookup.
Rollers 6” diameter with 1.88 wall
thickness. Supported by (2) 1.25”
two bolt ductile bearings
Input PTO…rated at 85 HP at 540 RPM
Deck PTO…rated at 38 HP at 540 RPM