Transporting mowers, Tires – Progressive Turf Equipment TDR-30 User Manual

Page 36

Advertising
background image

35

TRANSPORTING MOWERS

Always adhere to local department of transportation laws when transporting
equipment on local roadways.


When traveling on public roadways, use flashing amber lights and S.M.V. emblem on
rear of mower to provide greater visibility to other traffic.


When mower is in the raised position, ensure transport locks are engaged before
entering roadway.


Always have safety chain attached to towing vehicle.



When towing this mower the following information concerning road speed should be
strictly adhered to.

WEIGHT OF TOWING

VEHICLE

MAXIMUM ALLOWABLE

ROAD SPEED

4500 LBS OR MORE

UP TO 20 MPH (32 KM/H)

2300 LBS – 4500 LBS

UP TO 10 MPH (16 KM/H)

2300 LBS OR LESS

DO NOT TOW

TIRES

Upon receiving your mower, check air pressure in the tires and adjust according to
specifications.

Main Frame Tires – 32 PSI

Never inflate tires beyond 35 pounds per square inch to seat
beads. Inflation beyond 35 PSI pressure before seating the bead
may break the bead or even the rim with an explosive force. If

beads have not seated by the time the pressure has reached 35 PSI, deflate the
assembly, move tire to another position on the rim and re-lubricate. Inflate tire and
inspect both sides of the tires to be sure beads are seated properly. If not, deflate tire,
unseat beads and repeat the above mounting procedure. After properly seating beads
adjust to pressure recommended.

Advertising