Remotec ZXT-120 V1.1 - Manual (Page 16)

16
L Important Information
After all learning completed, user can go back to the ZXT‐120
control page on the gateway for normal operation.
− On the gateway UI, user can only use the temperature range
from the mapping table, OFF, ON(RESUME), COOL, HEAT,
DRY, If user press the button of FAN, or other function on the
gateway UI which is not listed in above table, ZXT‐120 will not
respond.
− If user only learnt ON, OFF, or part of the settings according
to the above table, ZXT‐120 will send the learnt data to the
air conditioner only. For example, user only learnt ON, OFF,
22°C Cool, 24°C Heat, ZXT‐120 will not send IR data to air
conditioner if user set 27°C Cool on the gateway.
− ZXT‐120 has been pre‐defined default cool at 26°C, default
heat at 22°C, when user press Cool on gateway without
setting temperature, ZXT‐120 will send the learnt data of 26°C
Cool to air conditioner. When user press Heat on gateway
without setting temperature, ZXT‐120 will send the learnt
data of 22°C Heat to air conditioner.
− There is only one code for dry mode, user can set it at any
preferred temperature.
− User can still use gateway to set up scene and schedule with
ZXT‐120, for example, to have AC turn on at 23°C every day at
7pm, 25°C at 11pm. Just make sure the set code is learnt.
− The learning mapping table is for split air conditioner which
remote control is with LCD display. For window type air
conditioner (which remote control is without LCD display),
the mapping table with temperatures do not apply, due to
different type of IR control protocol. However, user may still
use the
OFF, or ON/RESUME, DRY key for learning. (Because
the POWER key on the original remote without LCD display is
toggle, user can choose either ON key, or OFF key to learn
Power key, after learning is done, press once to turn on the
air conditioner if the air conditioner is OFF, press once to turn
off if the air conditioner is ON)