Wireless information, Maintenance, Frequently asked questions – Remotec ZXT-120 V1.1 User Manual

Page 21: Z‐wave frequently asked questions

Advertising
background image

21

WIRELESS INFORMATION 

Wireless range: 

This device has an open‐air line‐of‐sight transmission distance of 100 

feet which complies with the Z‐Wave standards. Performance can vary 

depending on the amount of objects in between Z‐Wave devices such 

as walls and furniture. Every Z‐Wave device set up in your network will 

act as a signal repeater allowing devices to talk to each other and find 

alternate routes in the case of a reception dead spot. 

Radio frequency limitations: 
1. Each wall or object (i.e.: refrigerator, bookshelf, large TV, etc) can 

reduce the maximum range of 65 feet by up to 25 to 30%. 

2. Plasterboard and wooden walls block less of the radio signal then 

concrete, brick or tile walls which will have more of an effect on 

signal strength. 

3. Wall mounted Z‐Wave devices will also suffer a loss of range if 

they are housed in metal junction boxes which could also reduce 

the range by up to 25 to 30%. 


MAINTENANCE 

 
1 Do not expose your ZXT‐120 to dust, strong sunlight, humidity, 

high temperatures or mechanical shocks. 

2 Do not use old and new batteries together as old batteries tend to 

leak. 

3 Do not use corrosive or abrasive cleansers on your ZXT‐120. 
4 Keep the unit dust free by wiping it with a soft, dry cloth. 
5 Do not disassemble your ZXT‐120, it contains no user‐serviceable 

parts. 

 
 

FREQUENTLY ASKED QUESTIONS 

 

Z‐Wave Frequently Asked Questions 
 

Q  Why won’t my ZXT‐120 work with the Z‐Wave devices I 

purchased from another country? 

A  Due to different countries regulations Z‐Wave products from 

different regions are set to different frequencies. Before 
purchasing new devices make sure you have checked that the 
device is compatible in your region.  

 
Q  How do I know which product is compatible with my ZXT‐120? 
A   ZXT‐120 should work with any Z‐Wave controller or gateway that 

has control capability for “Thermostat” devices. You can check 
either the specifications in the manual of your ZXT‐120 or also 
check online at www.remotec.com.hk for a full list of products 
that can be used with your ZXT‐120. All Z‐Wave products also 
come with the Z‐Wave logo. 

Advertising
This manual is related to the following products: