0x00 = 0 c (default), 0x01 = 1 c, 0x02 = 2 c – Remotec ZXT-120 V1.6E User Manual
Page 18: 0x03 = 3 c, 0x04 = 4 c, 0x05 = 5 c, 0xff = -1 c, 0xfe = -2 c, 0xfd = -3 c, 0xfc = -4 c
Advertising
- BASIC Set Value 0x00 will map to Thermostat mode Off 0x00.
- BASIC set Value 0xFF will map to Thermostat mode Resume 0x05.
Mapping Information
17
Parameter No.
Definitions
Parameter Value
37 (0x25)
S e n s o r t e m p e r a t u r e
compensation
(This parameter is used to
compensate the temperature
error at temperature sensor)
Temperature offset value.
Formula:
Display temperature = sensor
reading value + offset value
(unit = degree C)
o
0x00 = 0 C (Default)
o
0x01 = 1 C
o
0x02 = 2 C
o
0x03 = 3 C
o
0x04 = 4 C
o
0x05 = 5 C
o
0xFF = -1 C
o
0xFE = -2 C
o
0xFD = -3 C
o
0xFC = -4 C
o
0xFB = -5 C
Advertising