Remotec ZXT-120 V1.6E - Manual (Page 4)

3
Controller and Gateway Requirements
The ZXT-120 can work with any Z-Wave compliant controller or gateway supporting the
following Z-Wave commands.
- Configuration Command Class
- Multilevel Sensor Command Class
- Thermostat Command Class
> Thermostat Mode Command Class
> Thermostat Fan Mode Command Class
> Thermostat Set-point Command Class
Built-in IR code library
The Built-in IR code library supports most of the popular air conditioner brands in the
market. Z-Wave gateway and controller does not need to have any IR control code
knowledge. User can use Z-Wave controller or gateway to select the IR code according to
the ZXT-120 code list separately provided through Z-Wave configuration command.
Glossary
Device or Node
Devices and nodes are all terms to describe an individual Z-
Wave device. These are all interchangeable when setting up
your Z-Wave network.
Inclusion
Add a Z-Wave device to the network.
Exclusion
Delete a Z-Wave device to the network.
Remove
To take a device out of a group, scene or association group
while that device still exists in the same Z-Wave network.