Remotec ZXT-120 V1.6E - Manual (Page 20)

MOUNTING PROCEDURE
The ZXT-120 can be mounted to a wall or wooden racks using the two key holes in the
bottom case.
Note 1: The reception sensitivity varies depending on the antenna direction.
Note 2: Before mounting to a wall, be sure to fully read the precautions.
1. Obtain two screws suitable for the wall strength and material. The screw size is shown
in the figure below.
2. The positional relationship between the ZXT-120 key holes and the screw mounting
positions are shown in the figure below.
Note 1: When mounting the screws to the wall, leave a space between the wall and
screw cap as shown in the figure.
19
3-4mm(1/8 - 3/16ins.)
MIN. 6-8mm
(3/16 - 3/18ins.)
MIN. 3mm(1/8ins.)
48.5mm (1-7/8ins.)
4.5mm (3/16ins.)