Sensoray 2246 - Manual (Page 13)

In addition, the SDI input selection can also be modified with the Colorbar check box.
When this is done, (SDI selected with Colorbar checked), the 2246 will enable a
hardware generated colorbar pattern that will flow from the input IC, through the
processing elements, to the output.
Composite 0
Select NTSC or PAL composite video from ConnecterJ4 Pin - IN_CVBS0.
Composite 1
Select NTSC or PAL composite video from ConnecterJ4 Pin - IN_CVBS1.
SVideo 0
Select NTSC or PAL SVideo from connecter J4. Pins: IN_Y0 and IN_C0.
SVideo 1
Select NTSC or PAL SVideo from connecter J4. Pins: IN_Y1, and IN_C1.
DV
Display streaming video from an external video source connected to your host
computers 1394/Firewire port. (This input is unaffected by the PAL and NTSC
radio buttons, and the Colorbar check box.)
SDI
Select the ECL or LVDS serial data input signals containing serial SDTV
component digital video conforming to SMPTE 259M.
HDSDI
Select the ECL or LVDS serial data input signals containing serial HDTV
component digital video conforming to SMPTE 292M with a frame rate of
59.98Hz.
HDSDI2
Select the ECL or LVDS serial data input signals containing serial HDTV
component digital video conforming to SMPTE 292M with a frame rate of
50Hz or 60 Hz.
Output
Once the video input source has been selected, the 2246 will ‘echo’ the selected
analog input source to both the composite output (J5 Pin OUT_CVBS), the
SVideo output (J5 Pin OUT_Y and OUT_C), the DVI output (J3 and J7), and the
SDI output (J17).
13