Sensoray 2246 - Manual (Page 15)

A nominal value equals 128.
MPEG Settings
The Mpeg Settings groupbox allows the user to adjust the type and quality of the
hardware MPEG encoder.
Bitrate
The Bitrate variable sets the target bitrate of the constant bitrate algorithm on
the hardware MPEG encoder. Only values greater than zero are supported.
MPEG 1
Selects the MPEG 1 encoding standard.
MPEG 2
Selects the MPEG 2 encoding standard.
MPEG 4
Selects the MPEG 4 encoding standard.
Run Settings
The Run Settings groupbox allows the user select what audio/video components
are output by the application when the Streaming/Start button is activated.
Mute audio
When checked, this option disables the input audio stream from the 2246
from being played to the host PC’s speakers..
Display video
When checked, this option enables the host PC to display the incoming
MPEG stream.
Record Settings
Video Only
When selected, this option removes the audio component from the output
MPEG stream saved to disk.
Audio Only
When selected, this option removes the video component from the output
MPEG stream saved to disk.
Both Video and Audio
When checked, this option records both the audio and video components, of
the output MPEG stream, to disk.
15