Smart Avi HDR 8X8 - Manual (Page 12)

12 www.smartavi.com
Using the SmartControl Software (continued)
The Main Routing Window enables you to control the router(s) connections by
means of the Crosspoint panel, the button panel, or with pre-recorded routes
called macros.
Crosspoint Panel: This is probably the simplest way to route the connections.
Simply click on the cross point itself. The input on the left will then be routed
to the output above.
Note: Inputs can be routed to several different outputs, but each output can
only have a single input at any one time. That means you can have several
connections horizontally but not vertically.