Smart Avi HDR 8X8 - Manual (Page 26)

26 www.smartavi.com
Controlling the SMTCP-2 via HTTP
Matrix Menu
The matrix menu allows you to set the crosspoints for the matrix. Crosspoints are used
to route signals from the individual inputs to individual outputs. The output channels
can only have one input, but each input can have several outputs.
Example shown in diagram:
Input 1 to Outputs 3,4,5
Input this to Outputs 6,7,8
Input test to Output 1
Input 6 to Output 2
The Matrix Preset option allows you to save and recall crosspoint configurations with
the push of a button. To save a preset, simply configure your crosspoints and press the
SAVE button next to the desired preset. To recall a preset, simply click on the button
with its name. To edit the preset names, see the Device Config menu.
Once you have completed the Initial Setup for the SMTCP-2, you can now begin configuring it
for your matrix. The following details the individual menu options in the web interface:
Frame Address Menu
The frame address menu allows you to set the
frame address of the current matrix switch. Frame
addresses allow commands to be sent to different
matrixes in series. For more information on the
specific commands available, please see the
instructions for your matrix switch.
Using the SMTCP module (continued)