Smart Avi HDR 8X8 - Manual (Page 13)

13 www.smartavi.com
Using the SmartControl Software (continued)
The Button Panel:
These are the numbered buttons across the top and left sides. Click an output
button on the top, and then click an input button on the left.
Options for using the Button Panel
• Output Options:
To select multiple outputs next to each other, click on one output, then
hold the shift key down and click the last output. When the input is
clicked, it is routed to all selected outputs.
To select multiple outputs individually, hold the control key down and
click on any number of outputs. When the input is clicked, it is routed to
all selected outputs.
• Input Options:
To route an input to all the outputs at once, hold the control key down
and click on an input.
To leave the outputs selected after the route is made, hold the shift key
down and click on an input.