SP Controls SP3-AFVP+ - Manual (Page 16)

Technical Specifications
Warranty
SP Controls warrants all SP3-AFVP+ products and accessories against defects in materials and work-
manship for a period of three years from the date of purchase.
Although SP Controls thoroughly tested and reviewed this documentation, there is no warranty, express
or implied, with respect to quality, merchantability, or fitness for a particular purpose. Therefore, the
SP3-AFVP+ and accessories are provided "as-is" and the purchaser assumes the entire risk as to quali-
ty and performance.
There are no obligations or liabilities on the part of the SP Controls Corporation for consequential dam-
ages arising out of or in conjunction with the use or performance of these products or other indirect
damages with respect to loss of profit, revenue, or cost of removal and/or replacement. Some states do
not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have
other rights that vary from state to state. SP Controls' maximum liability shall not exceed the price paid
by the user.
All implied warranties, including warranties for merchantability and/or fitness, are limited in duration to
three (3) years from the date of purchase. Proof of purchase must be provided with any claim.
Copyright
SmartPanel™ and the SP Controls switch logo are trademarks of SP Controls, Inc. All other
trademarks mentioned in this manual are the properties of their respective owners. No part
of this document may be reproduced or transmitted in any form or by any means, electronic
or mechanical, for any purpose, without express written permission of SP Controls, Inc.
© 2002-2009 SP Controls, Inc. All rights reserved.
SP Controls, Inc. assumes no responsibility for any errors that appear in this document. Information in
this document is subject to change without notice.
email : [email protected]
web: spcontrols.com
phone: (877) 367-8444
SP Controls Inc.
930 Linden Ave.
S. San Francisco, CA 94080
Page 16
Audio Switching: 5 (unbalanced) Stereo Inputs
x 1 (balanced) Stereo Output
Mix Input: 1 (balanced) Mono Line Level
Video Switching: 4 x 1 Composite Video (Female BNC)
or
2 x 1 S-Video (Y-C) (Female BNC)
EQ (max) per channel: +/- 12dB @ 100Hz, +/- 12dB @ 10kHz
Gain (max) per channel: +16dB (with jumper settings)
Freq. Response (-3dB): 8Hz - 230kHz
Input Impedance: 50 kohm
Output Impedance: 50 ohm
THD+N @ 0dBu: 0.008%
Max Level In (Inputs 1-5): +10 dBu
Max Level In (Mix Input):
+12 dBu
Output Clip Level: +16 dBu
Output Noise: -90 dBu
Dynamic Range: 106 dB
Sig. to Noise Ratio (min): 95 dB