Sumix SMX-12A2x - Manual (Page 18)

Getting Started: Connecting the Camera
18 SMX-12A2x Series Gigabit Ethernet Camera User Guide
Figure 3-1 IN and OUT Ethernet ports of PoE power supply
To connect the camera:
1 Connect one Ethernet cable to the computer and to the IN port of the power supply.
2 Connect another Ethernet cable to the SMX-12A2x camera and to the OUT port of
the power supply.
3 Connect the power supply to the AC outlet.
When the cables are connected to the power supply correctly, the LED #1 and LED #3
will light up green. If the connection is not correct, the LED #2 will flash red.
When all connections are done, LEDs of the Ethernet port of the camera will light up.
Figure 3-2 Ethernet port of the camera
The left LED of the camera Ethernet port represents the video stream from the camera.
When video is running, the LED lights up green. When video is stopped, the LED
switches off.
The right LED of the camera Ethernet port represents the camera connection and data
transferring status. When the camera is connected correctly and connection is Gigabit,
the LED lights up yellow. Otherwise it is switched off.
LED #1 LED #2 LED #3