Sundance SMT364 - Manual (Page 31)

Version 1.0 Page 31 of 37 SMT364 User Manual
Register 0x2 –ADCC and ADCD Selection Modes and Decimation factors.
A Decimation Factor of 0 (default value) does not have any effect on the data flow.
When it is set to 1, one sample out of two is trimmed out. When it is set to 2, one out
of three is trimmed out and so on. The maximum value is 31.
Bit number Description
Bit 31 0
Bit 30 0
Bit 29 1
Bit 28 0
Bit 24-27
Bit 23
Bit 22
Bit 21 Channel D Mode Selection – Bit 1.
Bit 20 Channel D Mode Selection – Bit 0.
Bit 19 Decimation Factor Channel D – Bit 7
Bit 18 Decimation Factor Channel D – Bit 6
Bit 17 Decimation Factor Channel D – Bit 5
Bit 16 Decimation Factor Channel D – Bit 4
Bit 15 Decimation Factor Channel D – Bit 3
Bit 14 Decimation Factor Channel D – Bit 2
Bit 13 Decimation Factor Channel D – Bit 1
Bit 12 Decimation Factor Channel D – Bit 0
Bit 11
Bit 10
Bit 9 Channel C Mode Selection – Bit 1.
Bit 8 Channel C Mode Selection – Bit 0.
Bit 7 Decimation Factor Channel C – Bit 7
Bit 6 Decimation Factor Channel C – Bit 6
Bit 5 Decimation Factor Channel C – Bit 5
Bit 4 Decimation Factor Channel C – Bit 4
Bit 3 Decimation Factor Channel C – Bit 3
Bit 2 Decimation Factor Channel C – Bit 2
Bit 1 Decimation Factor Channel C – Bit 1
Bit 0 Decimation Factor Channel C – Bit 0