Super Systems DPC2530 - Manual (Page 12)

SSi
Super Systems Inc.
Product Manual #4553 - Model DPC2530 Continuous Dew Point Analyzer
SSi Manual 4553 – DPC2530 Super Systems, Inc. Page # 12 of 17
Revision Level “E” (800 ) 666-4330
RETURNING THE UNIT TO SSi –
This analyzer contains some components that may require periodic replacement based on
the amount of use that the unit experiences and the methods in which it is used. If service
on the unit is necessary, it should be sent back to Super Systems, Inc. for repair. To
minimize damage to the mounting feet on the enclosure, it is possible to unscrew them
and rotate them 180 degrees (so they point into the enclosure instead of away from it).
This will reduce the likelihood that they will be damaged during shipment. If the original
packaging is not available, the analyzer should be surrounded by impact-absorbing
materials and placed in a box. It is the responsibility of the shipper to ensure that the
DPC2530 arrives at SSi undamaged.
Before shipping the analyzer, please call (800) 666-4330 to receive a Return Materials
Authorization (RMA) number. The shipping address that should be used for returns is:
Super Systems, Inc.
ATTN: RMA #XXXX
7205 Edington Drive
Cincinnati, OH 45249
SPARE PARTS –
To simplify the ordering of replacement parts, the following is a list of some of the
components that may be requested:
Description Part No.
Factory Calibration 13045
Sample Pump 31401
Filter 37048
Replacement filter element 31027
Flow meter 36027
7EK Display/Controller 31081
Dew Point Sensor 31038
Calibration Kit 31030
24VDC Power Supply 31125