Super Systems DPC2530 - Manual (Page 2)

SSi
Super Systems Inc.
Product Manual #4553 - Model DPC2530 Continuous Dew Point Analyzer
SSi Manual 4553 – DPC2530 Super Systems, Inc. Page # 2 of 17
Revision Level “E” (800 ) 666-4330
TABLE OF CONTENTS –
SPECIFICATIONS – .................................................................................................................................. 1
TABLE OF CONTENTS – ......................................................................................................................... 2
INTRODUCTION –.................................................................................................................................... 2
WARNINGS – ............................................................................................................................................ 2
TERMINAL BLOCK WIRING – ............................................................................................................... 3
INSTRUMENT SETUP – ........................................................................................................................... 3
STARTUP – ................................................................................................................................................ 4
OPERATION - ............................................................................................................................................ 4
HOW IT WORKS – .................................................................................................................................... 5
FACTORY CALIBRATION – ................................................................................................................... 5
FIELD CALIBRATION – ........................................................................................................................... 5
RETURNING THE UNIT TO SS I
– ......................................................................................................... 12
SPARE PARTS
– ...................................................................................................................................... 12
APPENDIX
“A”
(D ETERMINING THE D EW P OINT IN °F)– ......................................................................... 13
APPENDIX
“B”
(D ETERMINING THE D EW P OINT IN °C)
– ........................................................................ 14
APPENDIX “C” – (D ETERMINING THE SENSOR TEMPERATURE IN °F) ...................................................... 15
APPENDIX “D” – (D ETERMINING THE SENSOR TEMPERATURE IN °C) ...................................................... 16
REVISION HISTORY – ........................................................................................................................... 17
INTRODUCTION –
Thank you for selecting Super Systems Inc. and the DPC2530 as your source for accurate
dew point measurements.
We have taken every precaution to protect this unit during shipment. Carefully unpack
the instrument, and if there are any signs of shipping damage notify SSi and the shipper
immediately.
Keep this instruction book in a secure place and refer to it when there is a question about
the analyzer.
WARNINGS –
Although it is intended for use in an industrial environment, the DPC2530 is a sensitive
piece of analysis equipment. Care should be taken not to operate it in a manner
inconsistent with its intended use.

Moisture (water) cannot be allowed to enter the analyzer. If water is present in the
sample gas, use an in-line dryer for sample conditioning. In the event that the sensor
becomes wet, use an inert gas (Nitrogen or Argon) to dry the inside of the instrument.
Under no circumstances should Methane (Natural Gas) be used to dry the DPC2530.