Super Systems 9000 Series - Manual (Page 10)

9XXX Management Guide Rev - Page 10 of 15 Super Systems Inc.
The “Recipe Description” line is a text description of the recipe. Note: The recipe descriptions
will only be saved if the recipes are being sent to a PC Group. When the recipe is sent to the
controller, (Use online device selected)
, the description text is not transferred to the
instrument.
Modify Recipes
To modify any of the steps in the recipe, double-click on the row of the step that will be
modified. This will display the
Edit Step form.
Configurator Recipe Edit Step form
The drop-down list under “Opcode” allows the user to select the specific opcode that will be
used in the recipe step. Checking the “Alphabetical” checkbox will allow the user to alphabetize
the list. If a temperature value or an atmosphere value is needed, these can be set using the up
or down arrows, or by just typing in the value. If these are not needed, check the “Disable”
checkbox and the boxes will become unavailable. Note – for some opcodes, the display text will
change and the
Edit Step screen will look slightly different to accommodate the different types
of values associated with each opcode, but the functionality of each item will remain the same.
The box(es) on the right side of the form is the action or value that should be taken. For
instance, with opcode “SetPt”, the box on the right is the “Option” and there is a drop-down list
of available options: wait, wait up, wait down. However, for opcode “soak”, the temperature
value and atmosphere value fields disappear. The boxes on the right of the form are “Soak
Time hours - minutes”, and there are two boxes that have values ranging from 0 to 166 for the
hours and 0 to 59 for the minutes. These values can be adjusted by using the up or down
arrows, or by typing the new value in.
The user can add an optional comment to the recipe step in the “Comment” field, if desired.
Once all of the changes have been made, the user can click on OK to save these changes.