Printing section, Archiving instrument configurations and recipes – Super Systems 9000 Series User Manual

Page 14

Advertising
background image

9XXX Management Guide Rev -

Page 14 of 15

Super Systems Inc.

If the Distribute option has been selected a Distribute Recipes pick list
will be presented. Select the desired destinations by clicking the
checkbox and adjust the recipe number as required. When finished
click Transfer and the distribution will commence.



The progress bar at the bottom of the section will update the send
process.

Note: Transferring recipes from or to a controller may take

a few minutes

.



Printing Section

The Printing section allows the user the ability to print out recipes. The “Source” field could
either be the currently connected device (“Use Online Device”), or one of the offline groups
(“PCGroup”). The “Print One” option will print only one recipe from the source. The recipe to
print will be based upon the numeric value within the box next to the “Print Multiple” option.
The “Print Multiple” option will print any number of sequential recipes from the source. When
the “Print Multiple” option is selected, there will be another numeric value box visible next to
the first numeric value box. This second box will be invisible when the “Print One” option is
selected. Checking the Print Only Valid Recipes box prevents the printing of empty or corrupted
recipe files.


Clicking on the Print button will display a print preview
dialog, where the user will be able to view and/or print
the recipes. Clicking on the Setup button will display a

Page Setup

screen, which will allow the user to set up

the page settings for printing, as well as select the
printer.

Note: Printing recipes from a controller may

take a few minutes

.

Archiving Instrument Configurations and Recipes


Instrument configurations and recipes are stored in two directories. All instrument
configurations are located in the C:\SSI\Devices directory and all recipes are located in the
C:\SSI\Recipes directory. To backup these directories to a remote location or flash drive simply
copy these two directories and then paste them to the desired location or drive.

Advertising