Super Systems PC Configurator 2 Quick Start - Manual (Page 7)

Quick Reference Manual Page 8 Super Systems Inc
Editing Controller Data
The right side of the screen contains
the controller data: atmosphere
actual and set point, temperature
actual and set point, Probe
information, Outputs, and Inputs.
Editing the Atmosphere set point
Click on the atmosphere set point box
(middle box in the left column) to alter the
set point. Enter the new value or use the up
and down arrows to select the new value.
Click on the OK button to set the new
atmosphere set point. Clicking on the Cancel
button will cancel the action.
Editing Atmosphere Output
Values
The bottom two boxes deal with the
output values. Click on the bottom
right box to change the value.
Select the new value, either “auto” or “manual”. Click on the OK button to change the
value, or click on the Cancel button to cancel the action.
Editing the Temperature set point
Click on the temperature set point box (middle
box in the right column) to alter the set point.
Enter the new value or use the up and down
arrows to select the new value. Click on the OK
button to set the new temperature set point.
Clicking on the Cancel button will cancel the
action.
Editing Temperature
Output Values
The bottom two boxes deal with
the
output values. Click on the bottom
right box to change the value.
Atmosphere Set Point
Atmosphere Actual Temperature Actual
Temperature Set Point