SUUNTO S6-SL - Manual (Page 48)

46
3. Change the content of the field with the arrow buttons and press Suunto. You
return to the function menu.
3.5.4. Altitude
You can use Altitude to set the reference altitude manually. The figure will be used to
update the altitude changes (Alti) and sea level air pressure changes (Baro). (For
more information on the reference altitude, see page 31.)
To set the reference altitude:
1. Press
Suunto in the main display to access the function menu.
2. In the function menu, scroll to Altitude with the arrow buttons and press Suunto.
The text Reference Altitude appears on the screen, and the current reference
altitude is shown in reversed color.
3. Set the reference altitude with the arrow buttons to match the altitude of your
current location and press Suunto. You return to the function menu.
3.5.5. Alarms
You can use this function to set alarms related to your altitude and ascent/descent
rate. The altitude alarm warns you if you pass the preset altitude limit. The ascent/
descent alarm warns you if your ascent/descent rate is faster than the preset rate.
When the alarm sounds, you can acknowledge it by pressing any of the buttons.
NOTE: The alarms can be activated and are functional only when the Use function
is set to Alti.
Setting the Asc/Dsc alarm
To set the ascent/descent alarm:
1. Press
Suunto in the main display to access the function menu.