SUUNTO S6-SL - Manual (Page 60)

58
4.2. SKIING/SNOWBOARDING DAY WITH SPEED MEASUREMENT
Before the start
1. Scroll to the Skiing mode.
2. Set the Reference altitude.
3. Set the logbook interval to 2s or 10s.
4. Start the logbook.
Speed measurement
1. Scroll to the SkiChrono mode.
2. Measure the slope angle (If there are people who wish to compare their speeds
with each other, they all have to set the same slope angle).
3. Press Start when you begin the run.
4. Press Stop/CL when you finish the run.
5. If you ski the same hill again (same slope angle), start the speed measurement
again with Start.
6. If you go to a new hill, reset the SkiChrono and measure a new slope angle.
After the day
1. Stop the logbook.
2. View the logbook information.
3. View the speed information in the SkiChrono memory.
4. Transfer the logbook information to the Ski Manager for more detailed inspection.